4-Channel Encoder Pulse Counter, 8-Channel Do, Modbus Tcpmodule

 Product features:
 Encoders decode and convert to standard Modbus RTU protocol
 Can be used as an encoder counter or speed measurement
 Supports simultaneous counting of 4 encoders and can recognize forward and reverse rotation
 Built in 8 DOs can be used as encoder upper and lower limit alarm outputs
 Power off automatically saves counter data
 Built in DO, each channel can independently output PWM signals
 Supports Modbus TCP communication protocol
 Built in web page function, which can query the level status through the web page
 Wide power supply range: 8~32VDC
 High reliability, easy programming, and easy application
 Standard DIN35 rail installation, convenient for centralized wiring
 Users can set module IP addresses and other parameters on the webpage
 Weblogin can set a password for greater security
 Low cost, small size, modular design
 Dimensions: 120 x 70 x 43mm
 Typical applications:
 Encoder pulse signal measurement
 Displacement or angle measurement
 Motor speed measurement and control
 Replace the meter counter to control multiple devices
 The encoder signal is transmitted remotely to the industrial computer
 Intelligent factory and industrial Internet of Things
 Replace PLC to directly transmit data to the control center
 IoT switch signal acquisition

 Product Overview:
 diagram 1 WJ96 module appearance diagram
 The WJ96 product realizes signal acquisition between sensors and hosts, which is used to decode encoder signals
 and control devices. The WJ96 series products can be applied in IoT and industrial Ethernet control systems,
 automated machine tools, industrial robots, three coordinate positioning systems, displacement measurement, stroke
 measurement, angle measurement, speed measurement, and more. The WJ96 series products include power conditioning, encoder signal acquisition, transistor output, and RJ-45  network interface communication. The communication method adopts MODBUS TCP protocol. TCP is a transport
 layer based protocol that is widely used and a reliable connection oriented protocol. Users can directly set module IP
 addresses, subnet masks, etc. on the webpage. Can be used for monitoring and controlling the operation of sensor
 devices.

The WJ96 series products are intelligent monitoring and control systems based on microcontrollers, where user set
 module IP addresses, subnet masks, and other configuration information are stored in non-volatile memory EEPROM.
 The WJ96 series products are designed and manufactured according to industrial standards, with strong
 anti-interference ability and high reliability. The working temperature range is-45 ℃ to+85 ℃.

 WJ96General Parameters:
 (Typical @+25 ℃, Vs is 24VDC)
 Input type: Encoder AB signal input, 4-channel (A0/B0~A3/B3).
 Low level: Input<1V
 High level: Input 3.5~30V
 Frequency range 0-50KHz
 Counting range-2147483647 ~+2147483647 , automatically saved upon power failure
 Input resistance: 30K Ω
 Output type: open collector output, voltage 0~30V, maximum load current 30mA, 8 channels (DO0~DO7).
 PWMfrequency 1~65535Hz, duty cycle 0%~100%
 Communication: MODBUS TCP communication protocol
 Webpage: Supports web access module and web page setting module parameters.
 Interface: RJ-45 network interface with built-in isolation transformer