0-5V to RJ45 Convert Analog Signals to Standard Modbus TCP Mes System Sensor

• Customization: Available
• Conductive Type: Bipolar Integrated Circuit
• Integration: GSI
• Model NO.: WJ188
• Operating Temperature: -55℃ - 125℃
• Shape: Flat
• Technics: Semiconductor IC
• Typical Applications: Signal Measurement, Monitoring, and Mqtt Reporting
• Typical Applications1: Modbus Tcpnetwork, Data Acquisition
• Typical Applications2: Intelligent Building Control, Security Engineerin
• Typical Applications3: Industrial Automation Control System Based on TCP
• Typical Applications8: Equipment Operation Monitoring, Mes System
• Typical Applications5: Measurement of Sensor Signals
• Typical Applications6: 4-20maor 0-5V Signal Acquisition
• Input Type: Current Input/Voltage Input
• Accuracy: 0.1%
• Transport Package: Wayjunr
• Specification: 106 mm x 59mm x 37mm
• Trademark: wayjunr
• Origin: Guangdong, China
• Production Capacity: 99999

Product Description

8-way 4-20mAor0-10V to network ModbusTCPand MQTTdata acquisition
 module WJ188

 Product features:
 Convert 8 analog signals into standard Modbus TCP protocol
 Using a 12 bitAD converter, the measurement accuracy is better than 0.1%
 The accuracy of the calibration module can be programmed through the network
  Supports communication protocols such as TCP Server, UDP, MQTT, etc
  Built in web page function, data can be queried through web pages
 Users can set module IP addresses and other parameters on the webpage
 Wide power supply range: 8~32VDC
 High reliability, easy programming, and easy application
 Standard DIN35 rail installation, convenient for centralized wiring
 Low cost, small size, modular design
 Dimensions: 106 mm x 59mm x 37mm
 Typical applications:
 Signal measurement, monitoring, and MQTT reporting
 Modbus TCPnetwork, data acquisition
 Intelligent building control, security engineering and other application systems
 Industrial automation control system based on TCP network
 Equipment operation monitoring, MES system
 Measurement of sensor signals
 Acquisition and recording of industrial field data
 Development of medical and industrial control products
  4-20mAor 0-5V signal acquisition

Product model:	WJ188
Communication interface RJ45: Output as RJ-45 network interface	Input voltage or current signal value U1:0-5V  A1:0-1mA  U2:0-10V  U4:0-2.5V  U5:0-±5V  U6:0-±10V  A2:0-10mA  A3:0-20mA  A4:4-20mA  A5:0-±1mA  A6:0-±10mA  A7:0-±20mA  U8: User defined A8: User defined	Selection example 1: Model: WJ188-A4-RJ45 represents 8 channels of 4-20mA signal input, and the output is an RJ-45  network interface  Selection Example 2: Model: WJ188-U1-RJ45 represents 8-channel 0-5V signal input, and the output is an RJ-45  network interface

Company Profile

Shenzhen Weijunrui Technology Co., Ltd

Since: 2011
Specialty: The company's main products include analog acquisition modules, signal isolators/conversion modules, and signal transmitters
Capacity: Produce 10000 per month
Advanced Features:
Switching to TCP/network/remote IO module, Modbus RTU to TCP, RS232/485 to Ethernet, analog signal (current/voltage/thermistor/frequency/displacement/speed/pulse) isolation transmitter, mV differential signal amplifier, isolation amplifier, micro power DC-DC module power supply, etc

Function Introduction:

 WJ188 General Parameters:

The WJ188 remote I/O module can be used to measure 8 analog signals.
 1. Analog signal input
 12 bit acquisition accuracy, 8 analog signal inputs. All signal input ranges have been calibrated before the product
 leaves the factory. During use, users can also easily program and calibrate themselves. Please refer to the product
 selection for specific current or voltage input range.
 2. Communication Protocol
 Communication interface: RJ-45 network interface. The two indicator lights at the network port position, the Link
 light (green light) stays on and the Data light (yellow light) stays on after the network cable is plugged in.
 Communication protocol: MODBUS TCP protocol is adopted to achieve industrial Ethernet data exchange. It can
 also communicate with modules through TCP sockets.
 Network cache: 2K bytes (for both sending and receiving)
 Communication response time: less than 10mS.
 3. Anti interference
 There is a transient suppression diode inside the module, which can effectively suppress various surge pulses and
 protect the module.

 (Typical @+25 ℃, Vs is 24VDC)
 Input type: current input/voltage input
 Accuracy: 0.1%
 Temperature drift: ± 50 ppm/℃ (± 100 ppm/℃, maximum)
 Input resistance: 150 Ω (4-20mA/0-20mA/0- ± 20mA current input)
 300 Ω (0-10mA/0- ± 10mA current input)
 1.5K Ω (0-1mA/0- ± 1mA current input)

 Greaterthan200K(5V/10Vvoltageinput)
 Greaterthan1MΩ(inputvoltagebelow2.5V)
 Bandwidth:-3dB10Hz
 Conversionrate:16FPS(factorydefaultvalue,userscanmodifytheconversionrateonthewebpage.)
 You can set theADconversion rate to 2SPS, 4SPS, 8SPS, 16SPS, 32SPS, 50SPS, 80SPS, 100SPS by sending
 commands
 Commonmoderejection(CMR):120dB(1kΩSourceImbalance@50/60Hz)
 Normalmodesuppression(NMR):60dB(1kΩSourceImbalance@50/60Hz)
 Inputprotection:overvoltageprotection,overcurrentprotection
 Communication:MODBUSTCPcommunicationprotocolorTCPsocketcharacterprotocolorMQTTprotocol
 Webpage:Supportswebaccessmoduleandwebpagesettingmoduleparameters.
 Interface:RJ-45networkinterface.
 Communicationresponsetime:10msmaximum
 Workingpower supply:+8~32VDCwidepower supply range,with internal anti reverse andovervoltage protection
 circuits
 Powerconsumption:lessthan3W
 Workingtemperature:-45~+80℃
 Workinghumidity:10~90%(nocondensation)
 Storagetemperature:-45~+80℃
 Storagehumidity:10~95%(nocondensation)
 Dimensions:106mmx59mmx37mm

FAQ

Q: How to contact you?
A: Please contact us via email or online customer service