Rotary Encoder Flow Meter Pulse Counting Flow Measurement PWM Output Pulse Signal

• Customization: Available
• Type: Rotary Encoder
• Working Principle: Absolute
• Model NO.: WJ63
• Readout Mode: Contact
• Operating System: Contact Brush Type
• Signal Output: Long Drive Output
• Axle Sleeve Type: Large Diameter Type
• Package: SMD
• Installation Form: Axle Sleeve Type
• Brand: Wayjunr
• Axonia: Servo Installation Type
• Product Features: Supports Setting PWM Output for RS-485/232 Interfa
• Product Features1: 8 Switch Inputs, 8 Switch Outputs
• Product Features2: Both Di and Do Support PNP and NPN Switching Funct
• Product Features3: The Count Value Can Be Read Through The RS-485/232
• Product Features4: Supports Setting PWM Output for RS-485/232 Interfa
• Typical Applications: Measurement of Proximity Switch Pulse Signal
• Typical Applications:1: Counting The Number of Logistics Packages
• Typical Applications2: Industrial Camera Status Monitoring and Control
• Typical Applications:4: Production Line Product Counting
• Input Resistance: 30K Ω
• Transport Package: Wayjun
• Specification: 120 x 70 x 43mm
• Trademark: wayjunr
• Origin: Guangdong, China
• Production Capacity: 9999

Product Description

8-way DI high-speed counter, 8-way DO supports PWMoutput, ModbusRTUmodule WJ63

Product Overview:
The WJ63 product realizes signal acquisition between sensors and hosts, used for pulse signal countingandequipment control. The WJ63 series products can be applied in industrial automation control systems withRS-232/485bus, photoelectric switch signal counting and measurement, PWM signal output and frequency measurement, etc. The product includes signal isolation, pulse signal capture, signal conversion, and RS-485 serial communication. Each serial port can connect up to 255 WJ63 series modules, and the communication method adopts ASCII codecommunication protocol or MODBUS RTU communication protocol. The baud rate can be set by code andcanbehungon the same RS-485 bus as control modules from other manufacturers, making it easy for computer programming

Product selection: WJ63 -  Communication interface 485: Output as RS-485 interface 232: Output as RS-232 interface Selection Example 1: Model: WJ63-232 indicates an output of RS-232 interface Selection Example 2: Model: WJ63-485 indicates output as RS-485 interface

Company Profile

Shenzhen Weijunrui Technology Co., Ltd

Since: 2011
Specialty: The company's main products include analog acquisition modules, signal isolators/conversion modules, and signal transmitters
Capacity: Produce 10000 per month
Advanced Features:
Switching to TCP/network/remote IO module, Modbus RTU to TCP, RS232/485 to Ethernet, analog signal (current/voltage/thermistor/frequency/displacement/speed/pulse) isolation transmitter, mV differential signal amplifier, isolation amplifier, micro power DC-DC module power supply, etc

Function Introduction:

Product features:

The WJ63 remote I/O module can be used to measure eight switch signals and has eight switch outputs. Canbeusedas an 8-channel counter or 8-channel frequency measurement, It can also output 8 PWM signals. 1, Switching signal input and output
8-channel switch signal input, capable of connecting dry and wet contacts. Please refer to the wiring diagramfordetails; 8-channel switch signal output with open collector output, or internal pull-up output. 2, Communication Protocol
Communication interface: 1 standard RS-485 communication interface or 1 standard RS-232 communicationinterface, please specify when ordering and selecting. Communication Protocol: Supports two protocols, the character protocol defined by the command set andtheMODBUS RTU communication protocol. The module automatically recognizes communicationprotocols and can achieve network communication with various brands of PLCs, RTUs, or computermonitoring systems. Data format: 10 digits. 1 start bit, 8 data bits, and 1 stop bit. The communication address (0-255) and baud rate (2400, 4800, 9600, 19200, 38400, 57600, 115200bps) canbeset;The communication network can reach a maximum distance of 1200 meters and is connectedthroughtwisted pair shielded cables. High anti-interference design of communication interface, ± 15KV ESD protection, communication responsetimeless than 100mS. 3, anti-interference
Checksums can be set as needed. There is a transient suppression diode inside the module, which caneffectivelysuppress various surge pulses, protect the module, and the internal digital filter can also effectively suppresspowerfrequency interference from the power grid.

 8 switch inputs, 8 switch outputs
Each DI channel can be used as a counter or frequency measurement
Each DO channel can independently output PWM signals
Both DI and DO support PNP and NPN switching functions
The count value can be read through the RS-485/232 interface
 Supports setting PWM output for RS-485/232 interface
Wide power supply range: 8~32VDC
High reliability, easy programming, and easy application
Standard DIN35 rail installation, convenient for centralized wiring
Users can program module addresses, baud rates, etc

 Supports Modbus RTU communication protocol and automatic recognition protocol
Low cost, small volume modular design
Dimensions: 120mm x 70mm x 43mm
Typical applications:
 Measurement of proximity switch pulse signal
 Flow meter pulse counting or flow measurement WJ63 module appearance diagram

 Production line product counting
 Counting the number of logistics packages
LED lighting control or motor control
 External counter for industrial control computer
lntelligent factory and industrial Internet of Things
Measurement of Pulse Sensor Signal
 Industrial camera status monitoring and control

Certifications

FAQ

Q: How to contact you?
A: Please contact us via email or online customer service