Pulse Signal Conversion Measure PWM to Modbus RTU Conversion Remote I/O Module

• Customization: Available
• After-sales Service: Weijunrui
• Warranty: Weijunrui
• Model NO.: WJ152
• Frequency Range: PWM Frequency Range 0-10kHz
• Type: Pulse Signal Generator
• Channel: 2
• Display: LCD
• Input Type: 2-Channel PWM Signal Input.
• Low Level: Input<1V
• High Level: Input 3.5~30V
• PWM Frequency Range: 0-10kHz.
• Input Resistance: 30K ω
• Communication Response Time: 100 Ms Maximum
• Power Consumption: Less Than 1W
• Working Temperature: Power Consumption
• Transport Package: Wayjunr
• Specification: 106 mm x 59mm x 37mm
• Trademark: wayjunr
• Origin: Guangdong, China
• Production Capacity: 9999
• Package Size: 20.00cm * 20.00cm * 20.00cm
• Package Gross Weight: 0.200kg

Product Description

Two PWM duty cycle signals converted to RS485, Modbus RTUmoduleWJ152

Product features:
 Measure PWM conversion to standard Modbus RTU protocol
 At the same time, it can measure the frequency of PWM
 Support measuring the phase difference between two PWM circuits
 Wide power supply range: 8~32VDC
 High reliability, easy programming, and easy application
 Standard DIN35 rail installation, convenient for centralized wiring
 Users can program module addresses, baud rates, etc
Typical applications:
 Motor PWM signal measurement
 Measurement of PWM signal for servo motor
 PLC signal measurement
 Frequency detection of PWM
 Intelligent factory and industrial Internet of Things
 PWM signal is transmitted remotely to the industrial computer

Product selection: WJ152 -  Communication interface 485: Output as RS-485 interface Selection example: Model: WJ152-485 indicates an RS-485 interface for output

Company Profile

Shenzhen Weijunrui Technology Co., Ltd

Since: 2011
Specialty: The company's main products include analog acquisition modules, signal isolators/conversion modules, and signal transmitters
Capacity: Produce 10000 per month
Advanced Features:
Switching to TCP/network/remote IO module, Modbus RTU to TCP, RS232/485 to Ethernet, analog signal (current/voltage/thermistor/frequency/displacement/speed/pulse) isolation transmitter, mV differential signal amplifier, isolation amplifier, micro power DC-DC module power supply, etc

WJ152 General Parameters:

Function Introduction:

(Typical @+25 ℃, Vs is 24VDC)
Input type: 2-channel PWM signal input. Low level: Input<1V
High level: Input 3.5~30V
PWM frequency range 0-10KHz. Input resistance: 30K Ω
Communication: RS-485 standard character protocol and MODBUS RTU communication protocol
Baud rates (2400, 4800, 9600, 19200, 38400, 57600, 115200bps) can be selected by software

The address (0-255) can be selected by software
Communication response time: 100 ms maximum
Working power supply:+8~32VDC wide power supply range, with internal anti reverse and overvoltage protectioncircuits
Power consumption: less than 1W
Working temperature: -45~+80 ℃
Working humidity: 10~90% (no condensation)
Storage temperature: -45~+80 ℃
Storage humidity: 10~95% (no condensation)
Dimensions: 106 mm x 59mm x 24mm

The WJ152 remote I/O module can be used to measure 2 PWM signals. 1, Signal input
2-channel PWM signal input, can be connected to dry contacts and wet contacts, and the input type canbeset
through commands. 2, Communication Protocol
Communication interface: 1 standard RS-485 communication interface. Communication Protocol: Supports two protocols, the character protocol defined by the command set andtheMODBUS RTU communication protocol. The module automatically recognizes communicationprotocols and can achieve network communication with various brands of PLCs, RTUs, or computermonitoring systems. Data format: 10 digits. 1 start bit, 8 data bits, and 1 stop bit. No verification. The communication address (0-255) and baud rate (2400, 4800, 9600, 19200, 38400, 57600, 115200bps) canbeset;The communication network can reach a maximum distance of 1200 meters and is connectedthroughtwisted pair shielded cables. High anti-interference design of communication interface, ± 15KV ESD protection, communication responsetimeless than 100mS. 3, anti-interference
Parity check can be set as needed. There is a transient suppression diode inside the module, which caneffectivelysuppress various surge pulses, protect the module, and the internal digital filter can also effectively suppresspowerfrequency interference from the power grid.

FAQ

Q: How to contact you?
A: Please contact us via email or online customer service