High-Speed Pulse Signal to RS485/232/WiFi Module Grating Ruler Magnetic Grating Ruler Encoder

• Customization: Available
• Type: Rotary Encoder
• Working Principle: Absolute
• Model NO.: WJ166
• Readout Mode: Contact
• Operating System: Contact Brush Type
• Signal Output: Long Drive Output
• Axle Sleeve Type: Large Diameter Type
• Package: PGA
• Installation Form: Standard DIN35 Rail Installation
• Brand: Wayjunr
• Axonia: Servo Installation Type
• Typical Applications: Flow Meter Pulse Counting or Flow Measurement
• Typical Applications1: Cncmachine Position Data Measurement
• Typical Applications2: The Encoder Signal Is Transmitted Remotely to The
• Typical Applications3: Replace PLC to Directly Transmit Data to The Contr
• Product Features: Standard DIN35 Rail Installation, Convenient for C
• Product Features1: The Encoder Count Value Supports Automatic Power-O
• Product Features2: Reset and Set Count Values Through RS-485/232 Inte
• Transport Package: Wayjunr
• Specification: 79x69.5x25mm
• Trademark: wayjunr
• Origin: Guangdong, China
• Production Capacity: 9999

Product Description

4-channel grating ruler magnetic grating ruler encoder 5MHz high-speed pulse
 signal to RS485/232/WiFi module WJ166

Product features:
The grating ruler and magnetic grating ruler are decoded and converted into standard Modbus RTU protocol
High speed grating ruler magnetic grating ruler 4th harmonic counting, with a frequency of up to 5MHz
The module can output a 5V power supply to power the grating ruler
  Supports simultaneous counting of 4 grating rulers, capable of recognizing forward and reverse rotation
 It can also be set as an 8-channel independent DI high-speed counter
 The encoder count value supports automatic power-off saving
 1000V isolation between DI input and RS485/232 communication interface
 Reset and set count values through RS-485/232 interface
 WiFi supports Modbus TCP and MQTT communication protocols
 Built in web page function, data can be queried through web pages
Wide power supply range: 8~32VDC
 Standard DIN35 rail installation, convenient for centralized wiring
 Dimensions: 120mm x 70mm x 43mm
 Typical applications:
 Grating ruler magnetic grating ruler length measurement
 Flow meter pulse counting or flow measurement
 Counting of products on the production line
 CNCmachine position data measurement
 The encoder signal is transmitted remotely to the industrial computer
 Replace PLC to directly transmit data to the control center

Product selection:  WJ166- - WiFi-   Form of antenna  Nbuilt-in antenna (default)  Communication interface 2  WiFi: Output as WiFi network interface  Communication interface 1  485: Output as RS-485 interface  232: Output as RS-232 interface	Selection Example 1: Model: WJ166-485-WiFi- N indicates RS-485 interface output, WiFi built-in antenna  Selection Example 2: Model: WJ166-232-WiFi-N with RS-232 interface output and built-in WiFi antenna

Company Profile

Shenzhen Weijunrui Technology Co., Ltd

Since: 2011
Specialty: The company's main products include analog acquisition modules, signal isolators/conversion modules, and signal transmitters
Capacity: Produce 10000 per month
Advanced Features:
Switching to TCP/network/remote IO module, Modbus RTU to TCP, RS232/485 to Ethernet, analog signal (current/voltage/thermistor/frequency/displacement/speed/pulse) isolation transmitter, mV differential signal amplifier, isolation amplifier, micro power DC-DC module power supply, etc

 WJ166 General Parameters:

 Function Introduction:

 (Typical @+25 ℃, Vs is 24VDC)
 Input type: Encoder AB signal input, 4-channel (A0/B0~A3/B3).
 Low level: Input<1V
 High level: Input 3.5~30V
 Frequency range 0-5MHz (all channels input simultaneously)
 Encoder counting range-2147483647 ~+2147483647, using 4x counting, automatically saved when powered off
 DI counter range 0~4294967295 , automatically saved when powered off
 Input resistance: 30K Ω
 Communication 1: Protocol RS-485 or RS-232 standard character protocol and MODBUS RTU communication protocol
 The baud rate (2400, 4800, 9600, 19200, 38400, 57600, 115200bps) can be set on the webpage
 Address (0-255) can be set on the webpage
 Communication 2: MQTT communication protocol or MODBUS TCP communication protocol or TCP/UDP
 communication protocol
 Communication response time: 100 ms maximum
 Working power supply:+8~32VDC wide power supply range, with internal anti reverse and overvoltage protection
 circuits
 Power consumption: less than 1W
 Working temperature:-45~+80 ℃
 Working humidity: 10~95% (no condensation)
 Storage temperature:-45~+80 ℃
 Storage humidity: 10~95% (no condensation)
 Isolation withstand voltage: DI input and power supply are grounded together, and 1000V isolation is provided between
 them and the communication interface.
 Dimensions: 79 mm x 69.5mm x 40mm

 The WJ166 remote I/O module can be used to measure four encoder signals, and can also be set as an 8-channel
 independent counter or DI status measurement.
 1,Signal input
 4-channel encoder signal input or 8-channel independent counter, can be connected to dry and wet contacts. Please
 refer to the wiring diagram for details.
 2,RS485/232 communication protocol
 Communication interface: 1 standard RS-485 communication interface or 1 standard RS-232 communication
 interface, please specify when ordering and selecting.
 Communication Protocol: Supports two protocols, the character protocol defined by the command set and the
 MODBUSRTUcommunication protocol. The module automatically recognizes communication
 protocols and can achieve network communication with various brands of PLCs, RTUs, or computer
 monitoring systems.
 Data format: 10 digits. 1 start bit, 8 data bits, and 1 stop bit. No verification.
 The communication address (0-255) and baud rate (2400, 4800, 9600, 19200, 38400, 57600, 115200bps) can be set;
 The communication network can reach a maximum distance of 1200 meters and is connected through
 twisted pair shielded cables.
 High anti-interference design of communication interface, ± 15KV ESD protection, communication response time
 less than 100mS.
 3,WiFi communication protocol
 Communication interface: WiFi network interface. It can connect to WiFi in the local area network and then
 connect to Ethernet.
 Communication protocol: Supports MQTT protocol and can connect to various MQTT servers such asAlibaba
 Cloud, Tencent Cloud, Huawei Cloud, China Mobile IoT OneNET, private cloud, etc. MODBUS TCP
 protocol can also be used to achieve industrial Ethernet data exchange.
 It also supports communication protocols such as TCP/UDP/WebSocket.
 Network cache: 2K bytes (for both sending and receiving)
 Communication response time: less than 10mS.
 4,anti-interference
 Checksums can be set as needed. There is a transient suppression diode inside the module, which can effectively
 suppress various surge pulses, protect the module, and the internal digital filter can also effectively suppress power
 frequency interference from the power grid

FAQ

Q: How to contact you?
A: Please contact us via email or online customer service