Open Collector Output Voltage 0~30V Modbus TCP Communication Protocol Encoder

• Customization: Available
• Features: The Encoder Is Decoded and Converted Into Standard
• Features1: Can Be Used as an Encoder Counter or Speed Measur
• Model NO.: WJ96
• Features2: Support 8 Encoders to Count at The Same Time, Can
• Features3: It Can Also Be Set as 16 Independent Di High-Speed
• Features4: Encoder Count Value Supports Automatic Saving Afte
• Features5: Through The RS-485/232 Interface Can Clear and Set
• Features6: High Reliability, Convenient Programming and Easy
• Features7: The User Can Program The Module Address, Baud Rate
• Features8: Flow Meter Pulse Counting or Flow Measurement
• Features9: Encoder Pulse Signal Measurement
• Features10: Counting The Number of Logistics Packages
• Features11: The Encoder Signal Is Transmitted Remotely to The
• Transport Package: Wayjunr
• Specification: 120mm x 70mm x 43mm
• Trademark: wayjunr
• Origin: Guangdong, China
• Production Capacity: 9999

Product Description

4-channel encoder pulse counter, 8-channel DO, Modbus TCPmoduleWJ96

Product Overview:
The WJ96 product realizes signal acquisition between sensors and hosts, which is used to decode encoder signalsand control devices. The WJ96 series products can be applied in IoT and industrial Ethernet control systems, automated machine tools, industrial robots, three coordinate positioning systems, displacement measurement, strokemeasurement, angle measurement, speed measurement, and more.The WJ96 series products include power conditioning, encoder signal acquisition, transistor output, andRJ-45 network interface communication. The communication method adopts MODBUS TCP protocol. TCPis atransportlayer based protocol that is widely used and a reliable connection oriented protocol. Users can directly set moduleIPaddresses, subnet masks, etc. on the webpage. Can be used for monitoring and controlling the operationof sensordevices. The WJ96 series products are intelligent monitoring and control systems based on microcontrollers, whereusersetmodule IP addresses, subnet masks, and other configuration information are stored in non-volatile memory EEPROM. The WJ96 series products are designed and manufactured according to industrial standards, withstronganti-interference ability and high reliability. The working temperature range is -45 ℃to+85 ℃.

Product Selection	WJ96-RJ45
	Communication interface RJ45: Output as RJ-45 network interface

Company Profile

Shenzhen Weijunrui Technology Co., Ltd

Since: 2011
Specialty: The company's main products include analog acquisition modules, signal isolators/conversion modules, and signal transmitters
Capacity: Produce 10000 per month
Advanced Features:
Switching to TCP/network/remote IO module, Modbus RTU to TCP, RS232/485 to Ethernet, analog signal (current/voltage/thermistor/frequency/displacement/speed/pulse) isolation transmitter, mV differential signal amplifier, isolation amplifier, micro power DC-DC module power supply, et

WJ96 General Parameters:

Function Description:

(Typical @+25 ℃, Vs is 24VDC)
Input type: Encoder AB signal input, 4-channel (A0/B0~A3/B3). Low level: Input<1V
High level: Input 3.5~30V
Frequency range 0-50KHz
Counting range -2147483647 ~+2147483647 , automatically saved upon power failure
Input resistance: 30K Ω
Output type: open collector output, voltage 0~30V, maximum load current 30mA, 8 channels (DO0~DO7). PWM frequency 1~65535Hz, duty cycle 0%~100%
Communication: MODBUS TCP communication protocol
Web page: Supports web access module and web page setting module parameters. Interface: RJ-45 network interface with built-in isolation transformer.Working power supply:+8~32VDC wide power supply range, with internal anti reverse and overvoltage protectioncircuits
Power consumption: less than 1W
Working temperature: -45~+80 ℃
Working humidity: 10~90% (no condensation)
Storage temperature: -45~+80 ℃
Storage humidity: 10~95% (no condensation)
Isolation voltage resistance: non isolated
Dimensions: 120mm x 70mm x 43mm

The WJ96 remote I/O module can be used to measure four encoder signals and has eight switch outputs. It canbeusedas a 4-channel encoder counter or 4-channel speed measurement, and can also output 8-channel PWMsignals. 1, Signal input and output
4-channel encoder signal input, can be connected to dry and wet contacts, please refer to the wiring diagramfordetails; 8-channel switch signal output with open collector output. 2, Communication Protocol
Communication interface: RJ-45 network interface. The two indicator lights at the network port position, theLinklight (green light) stays on after the network cable is plugged in, and the Data light (yellow light) will flash
intermittently. Communication protocol: MODBUS TCP protocol is adopted to achieve industrial Ethernet data exchange. Youcan also access the control module directly through the webpage. Network cache: 2K bytes (for both sending and receiving)
Communication response time: less than 10mS. 3, anti-interference
There is a transient suppression diode inside the module, which can effectively suppress various surge pulsesandprotect the module

FAQ

Q: How to contact you?
A: Please contact us via email or online customer service