Encoder Pulse Signal Measurement Displacement or Angle Measurement Modbus TCP Module

• Customization: Available
• Type: Rotary Encoder
• Working Principle: Absolute
• Model NO.: WJ96
• Readout Mode: Contact
• Operating System: Magnetoelectric Type
• Signal Output: Long Drive Output
• Axle Sleeve Type: Large Diameter Type
• Package: Wayjunr
• Installation Form: Standard DIN35 Rail Installation
• Brand: Wayjunr
• Axonia: Servo Installation Type
• Input Type: Encoder Ab Signal Input, 8 Channels
• Low Level: Input <1V
• High Level: Input 3.5 ~ 30V
• The Frequency: 0-10kHz
• Input Resistance: 30kΩ
• Working Power Supply: +8 ~ 32VDC Wide Power Supply
• Power Consumption: Less Than 1W
• Working Temperature: -45 ~ +80ºC
• Working Humidity: 10 ~ 90% (Non-Condensing)
• Transport Package: Wayjunr
• Specification: 120mm x 70mm x 43mm
• Trademark: wayjunr
• Origin: Guangdong, China
• Production Capacity: 9999
• Package Size: 20.00cm * 20.00cm * 20.00cm
• Package Gross Weight: 0.200kg

Product Description

4-channel encoder pulse counter, 8-channel DO, Modbus TCPmoduleWJ96

Product features:
Encoders decode and convert to standard Modbus RTU protocol
Can be used as an encoder counter or speed measurement
Supports simultaneous counting of 4 encoders and can recognize forward and reverse rotation
Built in 8 DOs can be used as encoder upper and lower limit alarm outputs
Power off automatically saves counter data
Built in DO, each channel can independently output PWM signals
Supports Modbus TCP communication protocol
Built in web page function, which can query the level status through the web page
Wide power supply range: 8~32VDC
High reliability, easy programming, and easy application
Standard DIN35 rail installation, convenient for centralized wiring
Users can set module IP addresses and other parameters on the webpage
Web login can set a password for greater security
Low cost, small size, modular design
Dimensions: 120 x 70 x 43mm
Typical applications:
Encoder pulse signal measurement diagram

Displacement or angle measurement
Motor speed measurement and control
Replace the meter counter to control multiple devices
The encoder signal is transmitted remotely to the industrial computer
Intelligent factory and industrial Internet of Things
Replace PLC to directly transmit data to the control center
IoT switch signal acquisition

Product Selection	WJ96-RJ45
	Communication interface RJ45: Output as RJ-45 network interface

Company Profile

Shenzhen Weijunrui Technology Co., Ltd

Since: 2011
Specialty: The company's main products include analog acquisition modules, signal isolators/conversion modules, and signal transmitters
Capacity: Produce 10000 per month
Advanced Features:
Switching to TCP/network/remote IO module, Modbus RTU to TCP, RS232/485 to Ethernet, analog signal (current/voltage/thermistor/frequency/displacement/speed/pulse) isolation transmitter, mV differential signal amplifier, isolation amplifier, micro power DC-DC module power supply, etc

WJ96 General Parameters:

Function Introduction:

(Typical @+25 ℃, Vs is 24VDC)
Input type: Encoder AB signal input, 4-channel (A0/B0~A3/B3). Low level: Input<1V
High level: Input 3.5~30V
Frequency range 0-50KHz
Counting range -2147483647 ~+2147483647 , automatically saved upon power failure
Input resistance: 30K Ω
Output type: open collector output, voltage 0~30V, maximum load current 30mA, 8 channels (DO0~DO7). PWM frequency 1~65535Hz, duty cycle 0%~100%
Communication: MODBUS TCP communication protocol
Web page: Supports web access module and web page setting module parameters. Interface: RJ-45 network interface with built-in isolation transformer

Working power supply:+8~32VDC wide power supply range, with internal anti reverse and overvoltage protectioncircuits
Power consumption: less than 1W
Working temperature: -45~+80 ℃
Working humidity: 10~90% (no condensation)
Storage temperature: -45~+80 ℃
Storage humidity: 10~95% (no condensation)
Isolation voltage resistance: non isolated
Dimensions: 120mm x 70mm x 43mm

The WJ96 remote I/O module can be used to measure four encoder signals and has eight switch outputs. It canbeusedas a 4-channel encoder counter or 4-channel speed measurement, and can also output 8-channel PWMsignals. 1, Signal input and output
4-channel encoder signal input, can be connected to dry and wet contacts, please refer to the wiring diagramfordetails; 8-channel switch signal output with open collector output. 2, Communication Protocol
Communication interface: RJ-45 network interface. The two indicator lights at the network port position, theLinklight (green light) stays on after the network cable is plugged in, and the Data light (yellow light) will flash
intermittently. Communication protocol: MODBUS TCP protocol is adopted to achieve industrial Ethernet data exchange. Youcan also access the control module directly through the webpage. Network cache: 2K bytes (for both sending and receiving)
Communication response time: less than 10mS. 3, anti-interference
There is a transient suppression diode inside the module, which can effectively suppress various surge pulsesandprotect the module

FAQ

Q: How to contact you?
A: Please contact us via email or online customer service