Encoder Pulse Counter Angular Velocity Displacement Measurement Modbus RTU

• Customization: Available
• Type: Angle Encoder
• Working Principle: Incremental
• Model NO.: WJ66
• Readout Mode: Non-Contact
• Operating System: Contact Brush Type
• Signal Output: Open Collector Output
• Axle Sleeve Type: Large Diameter Type
• Package: BGA
• Installation Form: Standard DIN35 Rail Installation
• Brand: Wayjunr
• Axonia: Servo Installation Type
• Typical Applications: Encoder Pulse Signal Measurement
• Typical Applications1: Displacement or Angle Measurement
• Typical Applications2: Motor Speed Measurement and Control
• Wide Power Supply Range: 8~32VDC
• Product Features: Encoders Decode and Convert to Standard Modbus RTU
• Advantage: Can Be Used as an Encoder Counter or Speed Measure
• Quantity: 99999
• Transport Package: Boxed
• Specification: 120mm x 70mm x 43mm
• Trademark: wayjunr
• Origin: Guangdong, China
• Production Capacity: 99999

Product Description

 Encoder pulse counter, angular velocity displacement measurement, Modbus RTU
 module WJ66

 Product features:
 Encoders decode and convert to standard Modbus RTU protocol
 Can be used as an encoder counter or speed measurement
 Supports simultaneous counting of 4 encoders and can recognize forward and reverse rotation
 Built in 8 DOs can be used as encoder upper and lower limit alarm outputs
 Power off automatically saves counter data
 Built in DO, each channel can independently output PWM signals
 Reset and set count values through RS-485/232 interface
 Wide power supply range: 8~32VDC
 High reliability, easy programming, and easy application
 Standard DIN35 rail installation, convenient for centralized wiring
 Users can program module addresses, baud rates, etc
 Low cost, small volume modular design
 Dimensions: 120mm x 70mm x 43mm
 Typical applications:
 Encoder pulse signal measurement
 Displacement or angle measurement
 Motor speed measurement and control
 Replace the meter counter to control multiple devices
 The encoder signal is transmitted remotely to the industrial computer
 Intelligent factory and industrial Internet of Things
 Replace PLC to directly transmit data to the control center

Product selection	WJ66
	Communication interface
485: Output as RS-485 interface  232: Output as RS-232 interface
Selection Example 1: Model: WJ66-232 indicates an output of RS-232 interface  Selection Example 2: Model: WJ66-485 indicates output as RS-485 interface

Company Profile

Shenzhen Weijunrui Technology Co., Ltd

Since: 2011
Specialty: The company's main products include analog acquisition modules, signal isolators/conversion modules, and signal transmitters
Capacity: Produce 10000 per month
Advanced Features:
Switching to TCP/network/remote IO module, Modbus RTU to TCP, RS232/485 to Ethernet, analog signal (current/voltage/thermistor/frequency/displacement/speed/pulse) isolation transmitter, mV differential signal amplifier, isolation amplifier, micro power DC-DC module power supply, etc

Global Showrooms

Factory Capabilities

 WJ66 General Parameters:
 (Typical @+25 ℃, Vs is 24VDC)
 Input type: Encoder AB signal input, 4-channel (A0/B0~A3/B3).
 Low level: Input<1V; High level: Input 3.5~30V
 Frequency range 0-50KHz
 Counting range-2147483647 ~+2147483647 , automatically saved upon power failure

 Inputresistance:30KΩ
 Outputtype:opencollectoroutput,voltage0~30V,maximumloadcurrent30mA,8channels(DO0~DO7).
 PWMfrequency1~65535Hz,dutycycle0%~100%
 Communication:RS-485orRS-232standardcharacterprotocolandMODBUSRTUcommunicationprotocol
 Baudrates(2400,4800,9600,19200,38400,57600,115200bps)canbeselectedbysoftware
 Theaddress(0-255)canbeselectedbysoftware
 Communicationresponsetime:100msmaximum
 Workingpower supply:+8~32VDCwidepower supply range,with internal anti reverse andovervoltage protection
 circuits
 Powerconsumption:lessthan0.5W
 Workingtemperature:-45~+80℃
 Workinghumidity:10~90%(nocondensation)
 Storagetemperature:-45~+80℃
 Storagehumidity:10~95%(nocondensation)
 Dimensions:120mmx70mmx43mm

Function Introduction:
 The WJ66 remote I/O module can be used to measure four encoder signals and has eight switch outputs. It can be used
 as a 4-channel encoder counter or 4-channel speed measurement, and can also output 8-channel PWM signals.
 1,Signal input and output
 4-channel encoder signal input, can be connected to dry and wet contacts, please refer to the wiring diagram for
 details; 8-channel switch signal output with open collector output.
 2,Communication Protocol
 Communication interface: 1 standard RS-485 communication interface or 1 standard RS-232 communication
 interface, please specify when ordering and selecting.
 Communication Protocol: Supports two protocols, the character protocol defined by the command set and the
 MODBUSRTUcommunication protocol. The module automatically recognizes communication
 protocols and can achieve network communication with various brands of PLCs, RTUs, or computer
 monitoring systems.
 Data format: 10 digits. 1 start bit, 8 data bits, and 1 stop bit.
 The communication address (0-255) and baud rate (2400, 4800, 9600, 19200, 38400, 57600, 115200bps) can be set;
 The communication network can reach a maximum distance of 1200 meters and is connected through
 twisted pair shielded cables.
 High anti-interference design of communication interface, ± 15KV ESD protection, communication response time
 less than 100mS.
 3,anti-interference
 Checksums can be set as needed. There is a transient suppression diode inside the module, which can effectively
 suppress various surge pulses, protect the module, and the internal digital filter can also effectively suppress power
 frequency interference from the power grid.

Certifications

FAQ

Q: How to contact you?
A: Please contact us via email or online customer service

A: Guaranteed 72-hour express production