Convert Differential Encoder to Standard Modbus RTU Protocol Rotational Speed Measurement

• Customization: Available
• Type: Rotary Encoder
• Working Principle: Absolute
• Model NO.: WJ158
• Readout Mode: Non-Contact
• Operating System: Magnetoelectric Type
• Signal Output: Complementary Push-pull Output
• Axle Sleeve Type: Large Diameter Type
• Package: Wayjunr
• Installation Form: Standard DIN35 Rail Installation
• Brand: Wayjunr
• Axonia: Servo Installation Type
• Product Features: Encoder 5V Differential Signal Input Directly
• Product Features1: Can Be Used as a Differential Encoder Counter or S
• Product Features2: The Module Can Output a 5V Power Supply to Power T
• Product Features3: High Reliability, Easy Programming, and Easy Appli
• Typical Applications: Grating Ruler or Magnetic Grating Ruler Pulse Coun
• Typical Applications1: Production Line Product Counting
• Typical Applications2: Grating Ruler or Magnetic Grating Ruler Pulse Cou
• Transport Package: Wayjun
• Specification: 79x69.5x25mm
• Trademark: wayjunr
• Origin: Guangdong, China
• Production Capacity: 9999

Product Description

 1 encoder meter or speed measurement, 1 DO upper limit alarm output WJ158

 Product features:
 Convert differential encoder to standard Modbus RTU protocol
 Encoder 5V differential signal input directly
 Can be used as a differential encoder counter or speed measurement
 Differential 5V signal input directly, encoder counting, can recognize forward and reverse rotation
one DOoutput can be set as a counting or frequency alarm signal
  It can also be set as a 2-channel independent DI high-speed counter
 The encoder count value supports automatic power-off saving
 The module can output a 5V power supply to power the encoder
 Reset and set count values through RS-485 interface
 Wide power supply range: 8~32VDC
 High reliability, easy programming, and easy application
 Standard DIN35 rail installation, convenient for centralized wiring
 Users can program module addresses, baud rates, etc
 Typical applications:
 Encoder pulse signal measurement and alarm
 Encoder Meter and Output Control
 Production line product counting
 The encoder signal is transmitted remotely to the industrial computer
 Grating ruler or magnetic grating ruler pulse counting
 intelligent factory and industrial Internet of Things

	Product selection:  WJ158-   Communication interface  485: Output as RS-485 interface  Selection example: Model: WJ158-485 indicates an RS-485 interface for output

Company Profile

Shenzhen Weijunrui Technology Co., Ltd

Since: 2011
Specialty: The company's main products include analog acquisition modules, signal isolators/conversion modules, and signal transmitters
Capacity: Produce 10000 per month
Advanced Features:
Switching to TCP/network/remote IO module, Modbus RTU to TCP, RS232/485 to Ethernet, analog signal (current/voltage/thermistor/frequency/displacement/speed/pulse) isolation transmitter, mV differential signal amplifier, isolation amplifier, micro power DC-DC module power supply, etc

 Product Overview:

Function Introduction:

 WJ158
 The WJ158 product realizes signal acquisition between sensors and hosts, used to decode encoder signals. The
 WJ158 series products can be applied in RS-485 bus industrial automation control systems, automated machine tools,
 industrial robots, three coordinate positioning systems, displacement measurement, stroke measurement, angle
 measurement, speed measurement, flow measurement, product counting, and more.
 The product includes signal acquisition, pulse signal capture, signal conversion, and RS-485 serial communication.
 Each serial port can connect up to 255 WJ158 series modules, and the communication method adopts ASCII code
 communication protocol or MODBUS RTU communication protocol. The baud rate can be set by code and can be hung
 on the same RS-485 bus as control modules from other manufacturers, making it easy for computer programming.The WJ158 series products are intelligent monitoring and control systems based on microcontrollers. All user set
 configuration information such as address, baud rate, data format, parity status, etc. are stored in non-volatile memory
 EEPROM.
 The WJ158 series products are designed and manufactured according to industrial standards, with no isolation
 between signal inputs/outputs, strong anti-interference ability, and high reliability. The working temperature range is-45 ℃to+85 ℃.

The WJ158 remote I/O module can be used to measure 1 differential encoder signal or set as 2 independent differential
 counters.
 1,Signal input
 One 5V differential encoder signal input or two independent 5V differential counters.
 2,signal output
 One DOsignal output, with a high level approximately equal to the power supply voltage and a low level of 0V, can
 directly drive the intermediate relay and set the output mode through commands.
 3,Communication Protocol
 Communication interface: 1 standard RS-485 communication interface.
 Communication Protocol: Supports two protocols, the character protocol defined by the command set and the
 MODBUSRTUcommunication protocol. The module automatically recognizes communication
 protocols and can achieve network communication with various brands of PLCs, RTUs, or computer
 monitoring systems.
 Data format: 10 digits. 1 start bit, 8 data bits, and 1 stop bit. No verification.
 The communication address (0-255) and baud rate (2400, 4800, 9600, 19200, 38400, 57600, 115200bps) can be set;
 The communication network can reach a maximum distance of 1200 meters and is connected through
 twisted pair shielded cables.
 High anti-interference design of communication interface, ± 15KV ESD protection, communication response time
 less than 100mS.
 4,anti-interference
 Parity check can be set as needed. There is a transient suppression diode inside the module, which can effectively
 suppress various surge pulses, protect the module, and the internal digital filter can also effectively suppress power
 frequency interference from the power grid.

FAQ

Q: How to contact you?
A: Please contact us via email or online customer service