RS-485/232 Switch Data Acquisition Module Switching Signal Input and Output Sensor Signal

• Customization: Available
• Conductive Type: Bipolar Integrated Circuit
• Input Type: Differential
• Model NO.: WJ68
• Integration: GSI
• Operating Temperature: -40℃ - 85℃
• Resolution: 12 Bit
• Shape: DIP
• Technics: Semiconductor IC
• Product Features: Eight Channels of PNP Switch Input, Eight Channels
• Product Features1: The Input Level Status Can Be Read Through The RS-
• Product Features2: The Output Status Can Be Set Through The RS-485/23
• Product Features3: The Signal Input, Output, and Power Supply Are Not
• Product Features4: High Reliability, Easy Programming, and Easy Appli
• Product Features5: Users Can Program Module Addresses, Baud Rates, Et
• Product Features6: Low Cost, Small Size, Modular Design
• Typical Applications: Level Signal Measurement, Monitoring, and Control
• Transport Package: Wayjunr
• Specification: 120mm x 70mm x 43mm
• Trademark: wayjunr
• Origin: Guangdong, China
• Production Capacity: 9999

Product Description

Eight PNP inputs, eight PNP outputs, RS-485/232 switch data acquisitionmoduleWJ68

Product Overview:
The WJ68 product realizes signal acquisition and control between sensors and hosts, used to detect switchsignalsorcontrol device operation. The WJ68 series products can be applied in industrial automation control systems withRS-232/485 bus, measurement and control of switch signals, measurement and output of high and lowlevel signals, aswell as industrial field signal isolation and long-distance transmission, etc. The product includes power conditioning, switch quantity acquisition, switch quantity output, and RS-485serial
communication. Each serial port can connect up to 255 WJ68 series modules, and the communication methodadoptsASCII code communication protocol or MODBUS RTU communication protocol. The baud rate can be set bycodeandcan be hung on the same RS-485 bus as control modules from other manufacturers, making it easy for computer
programming The WJ68 series products are intelligent monitoring and control systems based on microcontrollers. All user set
configuration information such as address, baud rate, data format, checksum status, etc. are stored in non-volatilememory EEPROM. The WJ68 series products are designed and manufactured according to industrial standards, with no isolationbetween signal inputs/outputs, strong anti-interference ability, and high reliability. The working temperature rangeis-45 ℃ to+85 ℃.

Product selection	WJ68
	Communication interface
	485: output is RS-485 interface 232: output is RS-232 interface	Selection Example 1: Model: WJ68-232 indicates that the communication interface is RS-232 Selection Example 2: Model: WJ68-485 indicates that the communication interface is RS-485

Company Profile

Shenzhen Weijunrui Technology Co., Ltd

Since: 2011
Specialty: The company's main products include analog acquisition modules, signal isolators/conversion modules, and signal transmitters
Capacity: Produce 10000 per month
Advanced Features:
Switching to TCP/network/remote IO module, Modbus RTU to TCP, RS232/485 to Ethernet, analog signal (current/voltage/thermistor/frequency/displacement/speed/pulse) isolation transmitter, mV differential signal amplifier, isolation amplifier, micro power DC-DC module power supply, etc

Function Introduction:

WJ68 General Parameters:

The WJ68 remote I/O module can be used to measure eight PNP switch signals and has eight PNP switch outputs. 1, Switching signal input and output
8-channel switch signal input, capable of connecting dry and wet contacts. Please refer to the wiring diagramfordetails; 8-way switch PNP signal output, with an output voltage equal to the power supply voltage andamaximum output current of 100mA. Be careful not to overload the output, otherwise it will burn out the output
channel. 2, Communication Protocol
Communication interface: 1 standard RS-485 communication interface or 1 standard RS-232 communicationinterface, please specify when ordering and selecting. Communication Protocol: Supports two protocols, the character protocol defined by the command set andtheMODBUS RTU communication protocol. The module automatically recognizes communicationprotocols and can achieve network communication with various brands of PLCs, RTUs, or computermonitoring systems. Data format: 10 digits. 1 start bit, 8 data bits, and 1 stop bit. The communication address (0-255) and baud rate (2400, 4800, 9600, 19200, 38400, 57600, 115200bps) canbeset;The communication network can reach a maximum distance of 1200 meters and is connectedthroughtwisted pair shielded cables. High anti-interference design of communication interface, ± 15KV ESD protection, communication responsetimeless than 100mS. 3, anti-interference
Checksums can be set as needed. There is a transient suppression diode inside the module, which caneffectivelysuppress various surge pulses and protect the module

(Typical @+25 ℃, Vs is 24VDC)
Input type: switch input, 8 channels (DI0~DI7). Low level: Input<1V
High level: Input 3.5~30V
Input resistance: 10K Ω
Output type: Switching output, 8 channels (DO0~DO7). PNP output, with an output voltage equal to the power supplyvoltage and a maximum load current of 100mA, can directly drive intermediate relays. Communication: RS-485 or RS-232 standard character protocol and MODBUS RTU communication protocol
Baud rates (2400, 4800, 9600, 19200, 38400, 57600, 115200bps) can be selected by software
The address (0-255) can be selected by software
Communication response time: 100 ms maximum
Working power supply:+8~32VDC wide power supply range, with internal anti reverse and overvoltage protectioncircuits
Power consumption: less than 0.5W
Working temperature: -45~+80 ℃
Working humidity: 10~90% (no condensation)
Storage temperature: -45~+80 ℃
Storage humidity: 10~95% (no condensation)
Isolation voltage resistance: non isolated
Dimensions: 120mm x 70mm x 43mm

FAQ

Q: How to contact you?
A: Please contact us via email or online customer service