Function Introduction:
The WJ63 remote I/O module can be used to measure eight switch signals and has eight switch outputs. Can be used
as an 8-channel counter or 8-channel frequency measurement,
It can also output 8 PWM signals.
1,Switching signal input and output
8-channel switch signal input, capable of connecting dry and wet contacts. Please refer to the wiring diagram for
details; 8-channel switch signal output with open collector output, or internal pull-up output.
2,Communication Protocol
Communication interface: 1 standard RS-485 communication interface or 1 standard RS-232 communication
interface, please specify when ordering and selecting.
Communication Protocol: Supports two protocols, the character protocol defined by the command set and the
MODBUSRTUcommunication protocol. The module automatically recognizes communication
protocols and can achieve network communication with various brands of PLCs, RTUs, or computer
monitoring systems.
Data format: 10 digits. 1 start bit, 8 data bits, and 1 stop bit.
The communication address (0-255) and baud rate (2400, 4800, 9600, 19200, 38400, 57600, 115200bps) can be set;
The communication network can reach a maximum distance of 1200 meters and is connected through
twisted pair shielded cables.
High anti-interference design of communication interface, ± 15KV ESD protection, communication response time
less than 100mS.
3,anti-interference
Checksums can be set as needed. There is a transient suppression diode inside the module, which can effectively
suppress various surge pulses, protect the module, and the internal digital filter can also effectively suppress power
frequency interference from the power grid.
Audited Supplier 
){kind=link}