Encoder Pulse Signal 1-Channel Encoder Pulse Counter or 2-Channel Di High-Speed Counter

• Customization: Available
• Type: Rotary Encoder
• Working Principle: Absolute
• Model NO.: WJ150
• Readout Mode: Contact
• Operating System: Contact Brush Type
• Signal Output: Long Drive Output
• Axle Sleeve Type: Large Diameter Type
• Package: PGA
• Installation Form: Standard DIN35 Rail Installation
• Brand: Wayjunr
• Axonia: Servo Installation Type
• Input Type: Encoder Ab Signal Input, 1 Channel (A0/B0).
• Input Resistance: 30KΩ
• Communication Response Time: 100 Ms Max
• Power Consumption: Less Than 1W
• Features: Encoder Decoding and Converting Into Standard Modb
• Features1: Can Be Used as Encoder Counter or Speed Measuremen
• Features2: It Can Also Be Set as 2 Independent Di High-Speed
• Transport Package: Wayjunr
• Specification: 106 mm x 59mm x 24mm
• Trademark: wayjunr
• Origin: Guangdong, China
• Production Capacity: 9999
• Package Size: 20.00cm * 20.00cm * 20.00cm
• Package Gross Weight: 0.200kg

Product Description

1-CH pulse or 2-CH DI high speed counter, Modbus RTU module WJ150 

Features:
>> Encoder decoding and converting into standard Modbus RTU protocol
>> Can be used as encoder counter or speed measurement
>> Support encoder counting, can identify forward and reverse
>> It can also be set as 2 independent DI high-speed counters
>> The count value supports automatic saving after power failure
>> DI input supports PNP and NPN input
>> Filter time can be set for relay and mechanical switch input
>> The count value can be cleared and set through the RS-485 interface
>> Wide power supply range: 8 ~ 32VDC
>> High reliability, convenient programming and easy application
>> Standard DIN35 rail installation, convenient for centralized wiring
>> User can programmatically set module address, baud rate, etc.
Application:
>> Encoder pulse signal measurement
>> Flow meter pulse counting or flow measurement
>> Line product count
>> Counting the number of logistics packages Figure 1 WJ150
>> Proximity switch pulse signal measurement
>> The encoder signal is transmitted to the industrial computer
>> Water meter or electricity meter pulse count
>> Smart Factory and Industrial Internet of Things

Product Selection: WJ150 -   Communication Interface  485: output is RS-485 interface part No.: WJ150 -485 means output is RS-485 interface

Company Profile

Shenzhen Weijunrui Technology Co., Ltd

Since: 2011
Specialty: The company's main products include analog acquisition modules, signal isolators/conversion modules, and signal transmitters
Capacity: Produce 10000 per month
Advanced Features:
Switching to TCP/network/remote IO module, Modbus RTU to TCP, RS232/485 to Ethernet, analog signal (current/voltage/thermistor/frequency/displacement/speed/pulse) isolation transmitter, mV differential signal amplifier, isolation amplifier, micro power DC-DC module power supply, etc

WJ150 general parameters:

Product Overview:

(typical @ +25℃, Vs is 24VDC)
Input type: Encoder AB signal input, 1 channel (A0/B0).
 Low level: input <1V
 High level: input 3.5 ~ 30V
 The frequency range is 0-50KHz
 Encoder counting range -2147483647 ~ [phone]
 DI counter range 0 ~ 4294967295
Input resistance: 30KΩ
Communication: Protocol RS-485 standard character protocol and MODBUS RTU communication protocol
 Baud rate (2400, 4800, 9600, 19200, 38400, 57600, 115200bps) can be selected by software
Address (0-255) can be selected by software 

Communication response time: 100 ms max
Working power supply: +8 ~ 32VDC wide power supply range, internal anti-reverse connection and overvoltage
protection circuit
Power consumption: less than 1W
Working temperature: -45 ~ +80℃
Working humidity: 10 ~ 90% (non-condensing)
Storage temperature: -45 ~ +80℃
Storage humidity: 10 ~ 95% (no condensation)
Dimensions: 106 mm x 59mm x 24mm 

The WJ150 product realizes the signal acquisition between the sensor and the host, and is used to
decode the encoder signal. WJ150 series products can be used in RS-485 bus industrial automation control
systems, automated machine tools, industrial robots, three-coordinate positioning systems, displacement
measurement, stroke measurement, angle measurement, rotational speed measurement, flow measurement,
product counting, etc.
Products include signal acquisition, pulse signal capture, signal conversion and RS-485 serial
communication. Each serial port can connect up to 255 WJ150 series modules. The communication method
adopts ASCII code communication protocol or MODBUS RTU communication protocol. The baud rate can be
set by code. It can be hung on the same RS-485 bus with other manufacturers' control modules, which is
convenient for computer programming. 

WJ150 series products are intelligent monitoring and control systems based on single-chip
microcomputers. All configuration information such as address, baud rate, data format, checksum status, etc.
set by the user are stored in the non-volatile memory EEPROM.
WJ150 series products are designed and manufactured according to industrial standards, with no isolation
between signal input/output, strong anti-interference ability and high reliability. Operating temperature range -
45℃-+85℃

FAQ

Q: How to contact you?
A: Please contact us via email or online customer service