The WJ96 remote I/O module can be used to measure four encoder signals and has eight switch outputs. It canbeusedas a 4-channel encoder counter or 4-channel speed measurement, and can also output 8-channel PWMsignals. 1, Signal input and output
4-channel encoder signal input, can be connected to dry and wet contacts, please refer to the wiring diagramfordetails; 8-channel switch signal output with open collector output. 2, Communication Protocol
Communication interface: RJ-45 network interface. The two indicator lights at the network port position, theLinklight (green light) stays on after the network cable is plugged in, and the Data light (yellow light) will flash
intermittently. Communication protocol: MODBUS TCP protocol is adopted to achieve industrial Ethernet data exchange. Youcan also access the control module directly through the webpage. Network cache: 2K bytes (for both sending and receiving)
Communication response time: less than 10mS. 3, anti-interference
There is a transient suppression diode inside the module, which can effectively suppress various surge pulsesandprotect the module
The WJ96 series products are intelligent monitoring and control systems based on microcontrollers, whereusersetmodule IP addresses, subnet masks, and other configuration information are stored in non-volatile memory EEPROM. The WJ96 series products are designed and manufactured according to industrial standards, withstronganti-interference ability and high reliability. The working temperature range is -45 ℃to+85 ℃
Audited Supplier 
){kind=link}