Modbus TCP and Mqtt, WiFi Module Relay Do Output Sensor Signal Data Collection

• Customization: Available
• Theory: Voltage Relay
• Usage: Car Relay, Communication Relay
• Model NO.: WJ170
• Phase: 3
• Electricity Type: Ac
• Number of Pole: 8
• Load: High Power Relay
• Protective Characteristics: Open Relay
• Action Principle: Rectifier Type
• Size: Miniature
• Type: Electric Parameter Relay
• Product Features: Two Relay Outputs, WiFi Communication Control
• Product Features1: Supports Communication Protocols Such as TCP Serve
• Product Features2: Built in Web Page Function, Can Control Relays Thr
• Wide Power Supply Range: 8~32VDC
• Product Features3: High Reliability, Easy Programming, and Easy Appli
• Product Features4: Low Cost, Small Size, Modular Design
• Product Features5: Signal Control, Monitoring, and Mqtt Reporting
• Product Features6: Measurement of Sensor Signals
• Transport Package: Wayjunr
• Specification: 106 mm x 59mm x 24mm
• Trademark: wayjunr
• Origin: Guangdong, China
• Production Capacity: 9999
• Package Size: 20.00cm * 20.00cm * 20.00cm
• Package Gross Weight: 0.200kg

Product Description

Two relay DO outputs, Modbus TCP and MQTT, WiFi module WJ170

Product Overview:
The WJ170 product enables transparent data exchange between sensors and networks to control device operation.
The operation of the equipment can be controlled by controlling the switch quantity generated by the relay through the
network.The WJ170 series products include power conditioning, relay control, and WiFi network interface communication.
The communication method adopts MODBUS TCP protocol.
TCP is a transport layer based protocol that is widely
used and a reliable connection oriented protocol.
Users can directly set module IP addresses, subnet masks, etc. on the
webpage.
Can be used for monitoring and controlling the operation of sensor devices.
The WJ170 series products are intelligent monitoring and control systems based on microcontrollers. The module
IP address, subnet mask, and other configuration information set by the user are stored in non-volatile memory
EEPROM.

Product selection:	WJ170- WiFi-
Form of antenna  W:External antenna  N: Built in antenna  X: Suction cup antenna  communication interface	WiFi: Output as WiFi network interface
Selection Example 1: Model: WJ170 WiFi W indicates WiFi interface and external antenna	Selection Example 2: Model: WJ170-WiFi N indicates WiFi interface with built-in antenna	Selection Example 3: Model: WJ170-WiFi X indicates WiFi interface, suction cup antenna

Company Profile

Shenzhen Bridal Manufacturing Co.

Since: 2008
Specialty: Modest formalwear with built-in solutions
Capacity: 10,000 dresses/month
Advanced Features:

3D virtual fitting room technology
Digital print customization
Climate-controlled fabric storage

 WJ170 General Parameters:

Product Overview:

Function Introduction:
The WJ170 remote I/O module can be used to control the output of two switch signals.
1, Switching signal output
2-channel C-type relay signal output, with normally open and normally closed contacts.
2. Communication Protocol
Communication interface: WiFi network interface.
Can connect to WiFi within the local area network.
Communication protocol: MODBUS TCP protocol is adopted to achieve industrial Ethernet data exchange.
It can
also communicate with modules through TCP sockets.
Network cache: 2K bytes (for both sending and receiving)
Communication response time: less than 10mS.
3. Anti interference
There is a transient suppression diode inside the module, which can effectively suppress various surge pulses and
protect the module.

 The WJ170 product enables transparent data exchange between sensors and networks to control device operation.
 The operation of the equipment can be controlled by controlling the switch quantity generated by the relay through the
 network  The WJ170 series products include power conditioning, relay control, and WiFi network interface communication.
 The communication method adopts MODBUS TCP protocol. TCP is a transport layer based protocol that is widely
 used and a reliable connection oriented protocol. Users can directly set module IP addresses, subnet masks, etc. on the
 webpage. Can be used for monitoring and controlling the operation of sensor devices.
 The WJ170 series products are intelligent monitoring and control systems based on microcontrollers. The module
 IP address, subnet mask, and other configuration information set by the user are stored in non-volatile memory
 EEPROM.
 The WJ170 series products are designed and manufactured according to industrial standards, with strong
 anti-interference ability and high reliability. The working temperature range is-45 ℃ to+80 ℃

FAQ

Q: How to contact you?
A: Please contact us via email or online customer service