Encoder Each Di Channel Can Be Used as a Counter or Frequency Measurement

• Customization: Available
• Type: Magnetic Grid Encoder
• Working Principle: Absolute
• Model NO.: WJ63
• Readout Mode: Contact
• Operating System: Contact Brush Type
• Signal Output: Long Drive Output
• Axle Sleeve Type: Large Diameter Type
• Package: PGA
• Installation Form: Axle Sleeve Type
• Brand: Wayjunr
• Axonia: Servo Installation Type
• Product Features: 8 Switch Inputs, 8 Switch Outputs
• Product Features1: Each Di Channel Can Be Used as a Counter or Freque
• Product Features2: Low Cost, Small Volume Modular Design
• Product Features3: Supports Setting PWM Output for RS-485/232 Interfa
• Product Features4: Both Di and Do Support PNP and NPN Switching Funct
• Typical Applications: Measurement of Proximity Switch Pulse Signal
• Typical Applications1: Measurement of Pulse Sensor Signal
• Typical Applications2: Industrial Camera Status Monitoring and Control
• Typical Applications3: Measurement of Pulse Sensor Signal
• Transport Package: Wayjunr
• Specification: 120 x 70 x 43mm
• Trademark: wayjunr
• Origin: Guangdong, China
• Production Capacity: 9999

Product Description

8-way DI high-speed counter, 8-way DO supports PWMoutput, ModbusRTUmodule WJ63

Product features:
8 switch inputs, 8 switch outputs
Each DI channel can be used as a counter or frequency measurement
Each DO channel can independently output PWM signals
Both DI and DO support PNP and NPN switching functions
The count value can be read through the RS-485/232 interface
Supports setting PWM output for RS-485/232 interface
Wide power supply range: 8~32VDC
High reliability, easy programming, and easy application
Standard DIN35 rail installation, convenient for centralized wiring
Users can program module addresses, baud rates, etc
Supports Modbus RTU communication protocol and automatic recognition protocol
Low cost, small volume modular design
Dimensions: 120mm x 70mm x 43mm
Typical applications:
Measurement of proximity switch pulse signal
Flow meter pulse counting or flow measurement 

 Production line product counting
Counting the number of logistics packages
LED lighting control or motor control
External counter for industrial control computer
Intelligent factory and industrial Internet of Things
Measurement of Pulse Sensor Signal
 Industrial camera status monitoring and control

Product selection: WJ63 -  Communication interface 485: Output as RS-485 interface 232: Output as RS-232 interface Selection Example 1: Model: WJ63-232 indicates an output of RS-232 interface Selection Example 2: Model: WJ63-485 indicates output as RS-485 interface

Company Profile

Shenzhen Weijunrui Technology Co., Ltd

Since: 2011
Specialty: The company's main products include analog acquisition modules, signal isolators/conversion modules, and signal transmitters
Capacity: Produce 10000 per month
Advanced Features:
Switching to TCP/network/remote IO module, Modbus RTU to TCP, RS232/485 to Ethernet, analog signal (current/voltage/thermistor/frequency/displacement/speed/pulse) isolation transmitter, mV differential signal amplifier, isolation amplifier, micro power DC-DC module power supply, etc

WJ63 General Parameters:

Function Introduction:

(Typical @+25 ℃, Vs is 24VDC)
Input type: switch input, 8 channels (DI0~DI7). Low level: Input<1V
High level: Input 3.5~30V

Frequency range 0-20KHz
Counting range 0-0xFFFFFFFF
Input resistance: 30K Ω
Output type: open collector output, voltage 0~30V, maximum load current 30mA, 8 channels (DO0~DO7). To achieve a level output, an internal pull-up resistor with a resistance of 3K ohms can be turnedon. PWM frequency 1~65535Hz, duty cycle 0%~100%
Communication: RS-485 or RS-232 standard character protocol and MODBUS RTU communication protocol
Baud rates (2400, 4800, 9600, 19200, 38400, 57600, 115200bps) can be selected by software
The address (0-255) can be selected by software
Communication response time: 100 ms maximum
Working power supply:+8~32VDC wide power supply range, with internal anti reverse and overvoltage protectioncircuits
Power consumption: less than 0.5W
Working temperature: -45~+80 ℃
Working humidity: 10~90% (no condensation)
Storage temperature: -45~+80 ℃
Storage humidity: 10~95% (no condensation)
Dimensions: 120mm x 70mm x 43mm

The WJ63 remote I/O module can be used to measure eight switch signals and has eight switch outputs. Canbeusedas an 8-channel counter or 8-channel frequency measurement, It can also output 8 PWM signals. 1, Switching signal input and output
8-channel switch signal input, capable of connecting dry and wet contacts. Please refer to the wiring diagramfordetails; 8-channel switch signal output with open collector output, or internal pull-up output. 2, Communication Protocol
Communication interface: 1 standard RS-485 communication interface or 1 standard RS-232 communicationinterface, please specify when ordering and selecting. Communication Protocol: Supports two protocols, the character protocol defined by the command set andtheMODBUS RTU communication protocol. The module automatically recognizes communicationprotocols and can achieve network communication with various brands of PLCs, RTUs, or computermonitoring systems. Data format: 10 digits. 1 start bit, 8 data bits, and 1 stop bit. The communication address (0-255) and baud rate (2400, 4800, 9600, 19200, 38400, 57600, 115200bps) canbeset;The communication network can reach a maximum distance of 1200 meters and is connectedthroughtwisted pair shielded cables. High anti-interference design of communication interface, ± 15KV ESD protection, communication responsetimeless than 100mS. 3, anti-interference
Checksums can be set as needed. There is a transient suppression diode inside the module, which caneffectivelysuppress various surge pulses, protect the module, and the internal digital filter can also effectively suppresspowerfrequency interference from the power grid

FAQ

Q: How to contact you?
A: Please contact us via email or online customer service