Remote I/O Module with Eight Switch Signals and Four Switch Outputs High Speed Ethernet Communication Socket Free Protocol

• Customization: Available
• Theory: Reed Relay
• Usage: Car Relay
• Model NO.: WJ94
• Phase: 3
• Electricity Type: Ac
• Number of Pole: 2
• Load: High Power Relay
• Protective Characteristics: Open Relay
• Action Principle: Rectifier Type
• Size: Miniature
• Type: Electric Parameter Relay
• Product Features: 8 Switch Inputs, 4 Switch Outputs
• Product Features1: Di Status Changes Automatically Send Status Data,
• Product Features2: Do Adopts PNP Output, Which Can Directly Drive Int
• Product Features3: Simultaneously Supports Modbus TCP Communication P
• Product Features4: Built in Web Page Function, Which Can Be Queried a
• Product Features5: Dual Network Ports Support Daisy Chain Connection
• Wide Power Supply Range: 8~32VDC
• Product Features6: High Reliability, Easy Programming, and Easy Appli
• Product Features7: Low Cost, Small Size, Modular Design
• Typical Applications: Directly Control The Electric Roller Drive Card
• Typical Applications1: Replace PLC Control to Achieve Remote Control and
• Transport Package: Wayjunr
• Specification: 120 x 70 x 43mm
• Trademark: WAYJUNR
• Origin: Wayjunr
• Production Capacity: 999999
• Package Size: 20.00cm * 20.00cm * 20.00cm
• Package Gross Weight: 0.200kg

Product Description

Switch quantity 8 in 4 out, high-speed Ethernet communication Socket free protocol remoteIOmodule WJ94

Product features:
8 switch inputs, 4 switch outputs
DI status changes automatically send status data, which can capture pulses
DO adopts PNP output, which can directly drive intermediate relays
Simultaneously supports Modbus TCP communication protocol
Built in web page function, which can be queried and controlled through web pages
Dual network ports support daisy chain connection for easy wiring
Wide power supply range: 8~32VDC
High reliability, easy programming, and easy application
Standard DIN35 rail installation, convenient for centralized wiring
Users can set module IP addresses and other parameters on the webpage
Web login can set a password for greater security
Low cost, small size, modular design
Dimensions: 120 x 70 x 43mm
Typical applications:
Directly control the electric roller drive card
Replace PLC control to achieve remote control and reduce costs
Intelligent logistics warehouse automatic sorting system
Ethernet industrial automation control system
Intelligent lighting control system
Equipment operation monitoring and control
Measurement of sensor signals
Industrial camera status monitoring and control
IoT switch signal acquisition

Product model: WJ94 - RJ45
Communication interface RJ45: Output as RJ-45 network interface

Company Profile

Shenzhen Weijunrui Technology Co., Ltd

Since: 2011
Specialty: The company's main products include analog acquisition modules, signal isolators/conversion modules, and signal transmitters
Capacity: Produce 10000 per month
Advanced Features:
Switching to TCP/network/remote IO module, Modbus RTU to TCP, RS232/485 to Ethernet, analog signal (current/voltage/thermistor/frequency/displacement/speed/pulse) isolation transmitter, mV differential signal amplifier, isolation amplifier, micro power DC-DC module power supply, etc

Function Introduction:

WJ94 General Parameters:

The WJ94 remote I/O module can be used to measure eight switch signals and has four switch outputs. 1, Switching signal input and output
8-channel switch signal input, capable of connecting dry and wet contacts. Please refer to the wiring diagramfordetails; 4-channel switch signal PNP output, with an output voltage equal to the power supply voltage andamaximum output current of 100mA. Be careful not to overload the output, otherwise it will burn out the output
channel. 2, Communication Protocol
Communication interface: 2 RJ-45 network interfaces. Each network port has two indicator lights. After thenetwork cable is plugged in, the Link light (green light) will flash continuously, and the Data light (yellowlight)will flash irregularly. The data between two network ports can be freely exchanged. Communication protocol: Adopt Socket free protocol or MODBUS TCP protocol to achieve industrial Ethernet dataexchange. You can also access the control module directly through the webpage. Network cache: 2K bytes (for both sending and receiving)
Communication response time: less than 5mS. 3, anti-interference
There is a transient suppression diode inside the module, which can effectively suppress various surge pulsesandprotect the module.

(Typical @+25 ℃, Vs is 24VDC)
Input type: switch input, 8 channels (DI0~DI7). Low level: Input<1V
High level: Input 3.5~30V
Input resistance: 30K Ω
Output type: switch output, 4-channel (DO0~DO3). PNP output, with an output voltage equal to the power supplyvoltage and a maximum load current of 100mA, can directly drive intermediate relays. Communication: MODBUS TCP communication protocol
Web page: Supports web access module and web page setting module parameters. Interface: 2 RJ-45 network interfaces. The data between two network ports can be freely exchanged. Working power supply:+8~32VDC wide power supply range, with internal anti reverse and overvoltage protectioncircuits
Power consumption: less than 2W

Working temperature: -10~+60 ℃
Working humidity: 10~90% (no condensation)
Storage temperature: -45~+80 ℃
Storage humidity: 10~95% (no condensation)
Isolation voltage resistance: non isolated
Dimensions: 120mm x 70mm x 43mm

FAQ

Q: How to contact you?
A: Please contact us via email or online customer service