8-CH Encoder Pulse Counter or 16-CH Di High-Speed Counter

• Customization: Available
• Type: Angle Encoder
• Working Principle: Absolute
• Model NO.: WJ69
• Readout Mode: Contact
• Operating System: Contact Brush Type
• Signal Output: RS485/RS232
• Axle Sleeve Type: Empty Type
• Package: BGA
• Installation Form: Standard DIN35 Rail Installation
• Brand: Wayjunr
• Axonia: Servo Installation Type
• Features: The Encoder Is Decoded and Converted Into Standard
• Features1: Can Be Used as an Encoder Counter or Speed Measure
• Features2: Support 8 Encoders to Count at The Same Time, Can
• Features3: Encoder Count Value Supports Automatic Saving Afte
• Features4: Through The RS-485/232 Interface Can Clear and Set
• Applications: Encoder Pulse Signal Measurement
• Applications1: Flow Meter Pulse Counting or Flow Measurement
• Input Type: Encoder Ab Signal Input, 8 Channels (A0/B0~ A7/B7)
• Quantity: 99999
• Transport Package: Boxed
• Specification: 120 mm x 70 mm x 43mm
• Trademark: wayjunr
• Origin: Guangdong, China
• Production Capacity: 99999

Product Description

8-CH encoder pulse counter or 16-CH DI high-speed counter
(MODBUS RTU module WJ69 Series)

Features: >> The encoder is decoded and converted into standard MODBUS RTU protocol
>> Can be used as an encoder counter or speed measurement
>> Support 8 encoders to count at the same time, can identify forward and reverse
>> It can also be set as 16 independent DI high-speed counters
>> Encoder count value supports automatic saving after no power
>> DI input / power supply isolation: 3000VDC
>> Through the RS-485/232 interface can clear and set the count value
>> Wide power supply range: 8 ~ 32VDC
>> High reliability, convenient programming and easy application
>> Standard DIN35 rail installation, convenient for centralized wiring
>> The user can program the module address, baud rate, etc.
>> Dimensions: 120 mm x 70 mm x 43mm
Applications: >> Encoder pulse signal measurement
>> Flow meter pulse counting or flow measurement
>> Production line product count
>> Counting the number of logistics packages
>> Proximity switch pulse signal measurement Figure 1 WJ69>> The encoder signal is transmitted remotely to the industrial computer
>> Smart Factory and Industrial Internet of Things
>> Instead of PLC, directly transmit data to the control center

Product Overview:
WAYJUN WJ69 products realize the signal acquisition between the sensor and the host, and is used to decode theencoder signal. WJ69 series products can be used in RS-232/485 bus industrial automation control systems, automatedmachine tools, industrial robots, three-coordinate positioning systems, displacement measurement, stroke measurement,angle measurement, speed measurement, flow measurement, product counting, etc.
Products include signal isolation, pulse signal capture, signal conversion and RS-485 serial communication. Eachserial port can connect up to 255 WJ69 series modules. The communication method adopts ASCII code communicationprotocol or MODBUS RTU communication protocol. The baud rate can be set by code. It can be hung on the sameRS-485 bus with other manufacturers' control modules, which is convenient for computers. Programming

Product Selection	WJ69
	Communication Interface
	485: output is RS-485 interface 232: output is RS-232 interface
Sample 1: part No.:WJ69-232 means output is RS-232 interface Sample 2: part No.: WJ69-485 means output is RS-485 interface

Company Profile

Shenzhen Weijunrui Technology Co., Ltd

Since: 2011
Specialty: The company's main products include analog acquisition modules, signal isolators/conversion modules, and signal transmitters
Capacity: Produce 10000 per month
Advanced Features:
Switching to TCP/network/remote IO module, Modbus RTU to TCP, RS232/485 to Ethernet, analog signal (current/voltage/thermistor/frequency/displacement/speed/pulse) isolation transmitter, mV differential signal amplifier, isolation amplifier, micro power DC-DC module power supply, etc

Global Showrooms

Factory Capabilities

WJ69 general parameters:
(typical @ +25℃, Vs is 24VDC)
Input type: Encoder AB signal input, 8 channels (A0/B0~ A7/B7).
Low level: input <1V
High level: input 3.5 ~ 30V
The frequency range is 0-10KHz (all channels are input at the same time), and a single channel cansupport 50KHz input.
Encoder counting range-2147483647 ~ [phone], automatically saved when power offDI counter range 0 ~ 4294967295, reset after power off
Input resistance: 30KΩ

Communication: Protocol RS-485 or RS-232 standard character protocol and MODBUS RTU communication protocolBaud rate (2400, 4800, 9600, 19200, 38400, 57600, 115200bps) can be selected by softwareAddress (0-255) can be selected by software
Communication response time: 100 ms max
Working power supply: +8 ~ 32VDC wide power supply range, internal anti-reverse connection and overvoltageprotection circuit
Power consumption: less than 1W
Working temperature:-45 ~ +80℃
Working humidity: 10 ~ 90% (non-condensing)
Storage temperature:-45 ~ +80℃
Storage humidity: 10 ~ 95% (no condensation)
Isolation withstand voltage: 3000V isolation between DI input and power supply, and the communication interface andpower supply share the same ground.
Dimensions: 120 mm x 70 mm x 43mm

Product Overview:
WAYJUN WJ69 products realize the signal acquisition between the sensor and the host, and is used to decode theencoder signal. WJ69 series products can be used in RS-232/485 bus industrial automation control systems, automatedmachine tools, industrial robots, three-coordinate positioning systems, displacement measurement, stroke measurement,angle measurement, speed measurement, flow measurement, product counting, etc.
Products include signal isolation, pulse signal capture, signal conversion and RS-485 serial communication. Eachserial port can connect up to 255 WJ69 series modules. The communication method adopts ASCII code communicationprotocol or MODBUS RTU communication protocol. The baud rate can be set by code. It can be hung on the sameRS-485 bus with other manufacturers' control modules, which is convenient for computers. Programming.WJ69 series products are intelligent monitoring and control systems based on single-chip microcomputers. Alluser-set address, baud rate, data format, checksum status and other configuration information are stored in non-volatilememory EEPROM.
WJ69 series products are designed and manufactured in accordance with industrial standards. There is no isolationbetween signal input and output, with strong anti-interference ability and high reliability. Operating temperature range-45-+85 deg.C.

Certifications

FAQ

Q: How to contact you?
A: Please contact us via email or online customer service